Carboxy Methyl Cellulose - (LV) In Singapore


We Innova Corporate (India), are Carboxy Methyl Cellulose-LV manufacturers, suppliers, importer & tradersfrom India based in Singapore. We have the best quality of Carboxy Methyl Cellulose-LV in Singapore, with very competitive price. Our Carboxy Methyl Cellulose-LV is made with very high quality raw materials using all quality standards of the Industry.

Carboxy Methyl Cellulose (CMC) of low viscosity which adheres to the Specifications. It is used as a fluid loss reducer in fresh, sea and saturated salt water based drilling fluids.

Application

Innova CMS-LV is used in various types of drilling fluids ranging from fresh water to saturated salt water. It is particularly used when borehole conditions or excessive reservoir pressures require higher mud weights; thus a low viscosity product is highly recommended for the control of the fluid loss.

In usual conditions Innova CMC-LV has no microbial susceptibility.

Innova CMS-LV can be used in a wide pH range (5-12). The product flows easily from the bags and if carefully added through the hopper, dissolves quickly in the drilling fluid without lumping.

Temperature

Innova CMS-LV solutions are highly heat resistant. The product has a peak operating temperature higher (300°F- 150°C) than other products such as Carboxy Methyl Starch (CMS) and Guar Gum. In the presence of strong alkali, oxygen & some metail ions, this value is reduced.

Performance

Innova CMS-LV meets the Specifications.

Other Results

Base fluid: sea water, bentonite 63 ppb. (180Kg/m³)

Innova CMC-LV ppb.(Kg/m³) Conc Av Pv Yp Api Filtrate
- - 6.5 3.5 6.0 48.5
2.8 8.0 9.0 8.5 1.0 8.1
3.5 10.0 9.5 9.0 1.0 5.4
4.2 12.0 11.0 10.5 1.0 4.2
4.9 14.0 13.5 12.5 2.0 3.5

Base fluid: Saturated salt water, attapulgite 14ppb. (40 Kg/m³

Innova LV ppb.(Kg/m³) CMC- CONC. Av Pv Yp Api Filtrate
- - 9.5 4.0 11.0 136.0
5.3 15.0 14.0 14.0 1.0 6.6
6.0 17.0 18.5 17.0 2.0 4.9
6.7 19.0 22.0 20.0 4.0 4.2
7.4 21.0 27.5 24.0 6.0 3.8

Treatment

The amount of Innova CMC-LV required depends on the type and the characteristics of the drilling fluid. In order to obtain 5-10ml. of fluid loss, typical concentration is as follows.

  ppb. Kg/m³
In fresh water muds 1-3 2.85 – 8.56
In sea water muds 2-5 5.71- 14.27
In saturated salt water muds 4-6 11.41-17.12

The product should be added slowly through a mixing hopper at a rate of 20 min/sk.

Typical Properties

Appearance Whitish free flowing powder
Moisture max.6%
D.S. 0.8-0.9
pH2% solution 9-11

Note: For Urgent requirement or Response kindly Share Your requirements On our Mail id karan@innovacorporate.com with Subject urgent or call us at +91-9911-981-992. We Can response you on same mail in our next 6 Working hours or ASAP.

 

We are approved Vendor from DMRC (Delhi Metro Rail Corporation)

© 2015 Innova Corporate (India)